.pdf File

CD Start Page

DATA ACQUISITION ONLINE Page

DATA ACQUISITION PRODUCTS Page

QSP-100 $495
Four Port RS-232 PCMCIA Card

• PCMCIA PC Card Standard Specification 2.1 Compliant



• Client Software Driver for DOS (PCMCIA Card Services Specification 2.1 Compatible)



• "Hot-Swapping" Supported (Insertion and Removal of QSP-100 While System is Powered Up)



• Selectable and Shareable Interrupt (IRQ 3-7, 9-12, 14, 15)



• Selectable I/O Base Address

The QSP-100 is a four channel RS-232 asynchronous serial adapter PCMCIA card which is PC Card Specification 2.1 compliant. The QSP-100 inserts into one Type II (5 mm) PCMCIA socket and provides four asynchronous RS-232 serial ports. These four serial ports are implemented with16550 UARTs; this will allow the QSP-100 to be used in multitasking environments and for applications involving high data rates. The
QSP-100 is accessed through standard D-9 connectors.

Users may select the particular I/O address space at which the QSP-100 is to be located. The four serial ports of the QSP-100 may be configured in a 32-byte continuous I/O address block. Also, the QSP-100 may be configured at any one interrupt level. An interrupt status register is provided for determining the serial port which was the source of the generated interrupt.

Since the four serial ports must share one hardware interrupt level, an enhanced serial device driver and .INF file are provided for Windows 95. The driver will allow four serial ports to share one hardware interrupt level.

In addition, a PCMCIA Card Services Version 2.1 compliant client driver for DOS is provided which will provide for automatic configuration of the QSP-100 upon each card insertion. This will permit the QSP-100 to be "hot-swapped". The QSP-100 will be automatically configured upon each card insertion. A separate enabler program is provided for the configuration of the QSP-100 for those who wish to run the card without card and socket services installed.

SPECIFICATIONS:

Bus Interface: PCMCIA PC Card Standard 2.1
Physical Dimensions: Type II (5 mm) PCMCIA card
Maximum Baud Rate: 120 K
Power Requirements: +5 volts, 25.75 mA (typical), 33.26 mA (maximum)
Connector: Four standard DSUB-9 male connectors via pigtail cables off the PCMCIA card

To Order (Specify Model Number)
Model No.	Price	Description
QSP-100	$495	Four Channel RS232 PCMCIA card
Comes with complete userÆs manual, PCMCIA configuration/driver software and PCMCIA card to four 9 pin connector cable. Ordering Example: QSP-100 four channel RS232 PCMCIA card, $495.

COPY [To Your Hard Drive] QSP-100 Configuration Program Now!

VIEW an Adobe Acrobat pdf file for more product info (requires Acrobat Reader).

VIEW the QSP-100 operator's manual now! (requires Acrobat Reader).

U.S.A. and Canada International Callers; Sales and Service; 203.359.1660

Please E-Mail any comments or suggestions to OMEGA®. ® COPYRIGHT 1999 OMEGA ENGINEERING, INC. ALL RIGHTS RESERVED